Radio Telemetry Serial Output Module
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
||
 |
|
 |
|
||
Features:
Radio telemetry serial ASCII output gateway
Drives displays, feeds data to data collections systems,
loggers, printers, computers and PLCs etc
Wide operating supply range
User definable serial ASCII output
RS232 or RS485 operation
Baud Rate 9,600 to 460,800, user-selectable
Surface mounting enclosure
Simple configuration and calibration
Internal antenna delivers up to 200m (650 ft) range
Water-proofed to IP65 NEMA 4
Introduction:
The T24-SO Radio Telemetry Serial Output module generates a serial output ASCII string which can include data from up to 8 x T24 acquisition modules as well as optionally sum them. The output is suitable for connecting to many serial input devices that require simple ASCII data.
The actual ASCII output can be designed by the user, and can include free text or tokens that can represent real data. i.e. <V1> would be the value from input module 1 when the output is triggered.
The output of the device can be triggered by the reception of user specified data. i.e. data is only outputted when data is received from a specific acquisition module or when triggered from a handheld device.
The licence free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. FCC, ETSI and IC approvals.
The module is configured using free T24 Toolkit software which runs on a PC connected to a T24 base station.
The internal antenna offers up to 200m (650 ft) range in an open field site.
The serial output can consist of a single line of data suitable for
feeding into an LED display module or a more complex multi-line
result that can contain a mixture of fixed and variable data
suitable for tickets, receipts etc for printed output.
The serial output is fixed at 8 data bits, 1 stop bit and no parity. Both
RS232 or RS485 are supported.
Baudrates can be selected as 9600, 19200, 38400, 57600,
115200, 230400, 460800. The output can be triggered from an
external digital trigger or by the arrival of data from a specific
device.
Specification:
| Parameter: | Min |
Typ |
Max |
Units |
| Electrical: | ||||
| External Power Supply Voltage | 9 |
12 |
36 |
VDC |
| Average Operational Current | - |
1 |
3.5 |
A |
| Reverse Polarity Protection | - |
- |
-36 |
V |
| Case Dimensions | 160 x 80 x 55 |
mm |
||
| Case Material | ABS, light grey |
|||
| Field Terminals | 2.5mm, rising clamp |
|||
| Environmental: | ||||
| IP Rating: | IP65 | |||
| Operating Temperature Range | -40 |
+65 |
°C | |
| Storage Temperature Range | -40 |
+85 |
°C | |
| Humidity | 0 |
95 |
%RH | |
| General Radio Data: | ||||
| Licence | Licence exempt | |||
| Modulation Method | MS(QPSK) | |||
| Radio Type | Transceiver (2 way) | |||
| Data type | 250 |
kbits/s | ||
| Radio frequency | 2.4 |
GHz | ||
| Power | 1 |
mW | ||
| Range - Integral Antenna | 100 (325) |
m (ft)** | ||
| Channels (DSSS) | 16 |
|||
** Maximum range achieved in open field site at height of 3 metres (9.8 feet) above ground.
T24-SO Radio Telemetry Serial Output Module
Modules in the T24 system:
T24-SA Strain gauge (load cell) amp
T24-AO1 Analogue output
T24-VA Voltage signal acquisition
T24-IA Current signal acquisiton
T24-SAf "Fast" strain gauge
data acquisition
T24-HS Hand-held reader
T24-HA Advanced hand-held reader
T24-BSu USB PC base station
T24-BSi RS232 "industrial"
base station
T24-SO Serial output
T24-PR1 Thermal Printer
T24-RM1 Relay module
T24-BC1 Battery charger
T24-ACM Single channel acquisition connectivity module
T24-AR Repeater module
T24-ANT Antenna options
T24-FAQ Frequently Asked Questions
Please contact us for more information and prices
